Bathroom Sprayers Classic 10 Bathroom Bidet Sprayer
Kit includes: 1 Sprayer, 1 Flex Hose, 1 Wall Mount Bracket, 1 T-Valve Water Connector, Mounting Screws and Teflon Tape. Make sure your water line will fit a 1/2 inch Valve like we provide. If you are not sure then you can check with your nearest hardware store or Home Depot.
Step 1. Turn off the water supply to the toilet.
Step 2. Remove the Water Valve from water line coming from the wall.
Step 3. Connect the T-Valve provided with your Bathroom Sprayer Kit to the water line using the Teflon tape to create a water tight seal. Note: If your water line is an unthreaded brass pipe you will need to attach a brass compression nut first and then attach the T-Valve to that nut.
Step 4. Attach the bracket to hold the sprayer to the wall.
Step 5. Attach the Sprayer Knozzle to the hose. First place the black rubber washer with the metal mesh inside before tightening. If you experience any water leakage you can wrap sealing tape around the threads and then tighten again but you shouldn't need it.
Step 6. Reconnect the toilet water line to the T-Valve using the Teflon Tape to create a water tight seal.
Step 7. Connect your Bathroom Sprayer to the other opening on the T-Valve using the Teflon Tape to create a water tight seal. First place the black rubber washer inside before tightening. You can use a wrench or pliers to make sure it's tight enough.
Step 8. Turn the water supply on and check for leaks. Retighten or apply more tape as needed.